How to Make a Reflex Deflex Longbow, Part 6: Horn Tips and Tillering to 41 lb

Heads-up: This is an older build. The series ends with the bow in raw wood; the lacquer finish, final string, and shooting happened off camera.

What I do in this part

I add the horn tip overlays, cut the string grooves, and continue tillering. This is where the build reaches its recorded result: 41 lb at a 28-inch draw.

Tools & materials

  • Horn for the tip overlays.
  • G/flex epoxy.
  • Chainsaw file for the string grooves.
  • Tillering setup.

Horn tips

The overlays are glued on with G/flex. I use a chainsaw file to cut the string grooves. The horn work and groove shaping are worth watching closely in the video rather than guessing at their size from the finished bow.

Tillering

After the first pull in part 5, I continue working on the bow’s bend. The recorded draw weight here is 41 lb at 28 inches. That’s the result for this bow at this stage, not a guaranteed result from copying the rough layout dimensions.

Tips

  • Keep the adhesives straight: the horn overlays use G/flex, not the five-minute epoxy used for the splice and riser.
  • The tillering shown here doesn’t mean the series includes a final-string tutorial or shooting footage. Those steps happened off camera.

Up next: Part 7, shaping the pistol grip and arrow shelf.

← Part 5 | Watch the full series on YouTube | Part 7 →

Watch on YouTube

Leave a Comment

Your email address will not be published. Required fields are marked *