How to Make a Reflex Deflex Longbow, Part 7: Shaping the Grip and Arrow Shelf

Heads-up: This is the last filmed part. The bow is still raw wood at the end; the lacquer finish, final string, and shooting happened off camera.

What I do in this part

With the bow tillered to 41 lb at a 28-inch draw in part 6, I shape the pistol grip and arrow shelf, then sand the wood. This is the last video in the seven-part build, not the start of a missing finishing episode.

Tools & materials

  • The tillered bow from part 6.
  • Sandpaper: 80, 120, 220, and 300 grit.

Shaping and sanding

  1. Shape the pistol grip.
  2. Shape the arrow shelf.
  3. Work through the recorded sanding sequence: 80, 120, 220, then 300 grit.

The focus here is the handle and shelf taking their final shape. The footage stops before the lacquer goes on.

What’s next

The lacquer finish, final string, and shooting were done off camera. There is no filmed finish application, string-making sequence, grip wrap, or shooting demonstration in these seven parts.

That’s the end of this series in the Vault: a hickory-backed Ipe reflex-deflex bow, tillered and shaped, with the wood still bare on camera.

Missed a step? Start from part 1.

← Part 6 | Watch the full series on YouTube

Watch on YouTube

Leave a Comment

Your email address will not be published. Required fields are marked *