How to Make a Reflex Deflex Longbow, Part 3: The Hickory Back and Z-Splice

Heads-up: This is an older build. The series ends with the bow in raw wood; the lacquer finish, final string, and shooting happened off camera.

What I do in this part

This part moves to the back of the bow, which is hickory. I fit and glue the Z-splice. The useful trick here is sanding both pieces together so the mating surfaces match, instead of trying to shape each one separately and hoping they meet.

Tools & materials

  • The hickory backing pieces.
  • Disc sander.
  • Five-minute epoxy.
  • Clamps for the sides of the joint.

Step by step

  1. Stack the pieces for fitting the splice.
  2. Sand both pieces together on the disc sander to match the joint.
  3. Check how the pieces meet before gluing.
  4. Glue the splice with five-minute epoxy.
  5. Use side clamps to hold the joint together.

Tips

  • The stacked sanding is the detail worth catching in the video. It lets the two pieces share the same shaping pass.
  • This splice is a separate glue operation from the backing glue-up in part 4. The adhesives shown for the two jobs are different.

Up next: Part 4, gluing up on the reflex-deflex form.

← Part 2 | Watch the full series on YouTube | Part 4 →

Watch on YouTube

Leave a Comment

Your email address will not be published. Required fields are marked *