Heads-up: This is an older build. The series ends with the bow in raw wood; the lacquer finish, final string, and shooting happened off camera.
What this series builds
A hickory-backed Ipe longbow with a reflex-deflex profile, a spliced stave, and horn tip overlays. By part 6, it’s tillered to 41 lb at a 28-inch draw. Part 1 starts with the wood, before any of that takes shape.
Materials for the whole build
- Ipe for the bow’s belly.
- Hickory for the backing.
- Sapele and Ipe for the riser.
- Horn for the tip overlays.
- Five-minute epoxy for the splice and riser.
- Unibond 800 for the form glue-up.
- G/flex for the horn overlays.
- An inner tube for wrapping the glue-up, plus clamps and a reflex-deflex form.
Starting with the wood
The Ipe board in this build starts at 1 x 6 inches by 7 feet. The hickory stock is 1½ x 1 inch by 7 feet. I also discuss a pickaxe handle as an alternative source of backing wood.
The starting stock isn’t the finished bow size. There is still layout, cutting, splicing, and shaping ahead.
Why it matters
This build uses separate pieces for the belly and backing, then glues them together on a form. Keep those jobs separate as you follow along: preparing the wood comes first, and the form gives the glue-up its profile later.
Up next: Part 2, laying out the bow.
